Activated Carbon HEPA Car AC Filter Replacement For Tesla Model 3 Y

Customized Tesla Model 3 Y Air Conditioning Filter External Filter
 

Function and principle: Its main function is to filter the air entering the car's air conditioning system, which can prevent pollen, dust, VOC, odor, etc. from entering the air circulation system in the car. It usually uses HEPA filter material, combined with activated carbon, etc., to filter and purify particulate matter and harmful gases in the air through physical interception and adsorption.

Quantity and material: Model Y has a total of 6 air conditioning filters, of which 4 are external, usually HEPA + activated carbon material, and 2 are built-in, mostly activated carbon material

Compatible models:

1. Camry
2. Corolla
3. Levin

N95 air conditioning filter helps you stay away from air pollution​





Our strength (decades of experience in the industry)​




 

Knowledge sharing:
 

Replacement method: You need to prepare a hexagonal screwdriver and a No. 10 socket wrench. First remove the snap-on cover above the filter assembly, then loosen the snaps between the front trunk and the water tank, and remove the four screws on the front trunk. Note that you do not need to completely remove the front trunk. Then use a No. 10 socket wrench to remove the two screws on both sides of the biochemical filter assembly, and lift the external filter assembly up to remove it. Finally, use a hexagonal wrench to remove the screws around the assembly, and you can see the filter. Replace the old filter with a new one. Pay attention to the filter orientation mark and do not install it upside down.